Toyota Camry Manual page 373

BE–54
BODY ELECTRICAL SYSTEM
WIPER HI
Switch position
MIST OFF
MIST ON
WASHER
Switch position
Condition
*1 Constant
"Apply B+ between
terminals 16 and 18.
*': With wiper switch OFF or– INT, and MIST ON.
If continuity is not as specified, replace the switch.
Intermittent Wiper Operation
(a) Turn the wiper switch to INT position.
(b) Turn the intermittent time control switch to FAST
position.
(c) Connect the positive (+) lead from the battery to
terminal 13– 18 and the negative (–) lead to terminal B
–16.
(d) Connect the positive (+) lead from the voltmeter to
terminal B–7 and the negative (–) lead to terminal B
–16, check that the meter needle indicates battery
positive voltage.
– WIPER AND WASHER SYSTEM
Tester connection to
terminal number
B6 B16
B13–B18
B6 B16
B13–B18
Tester connection to
terminal number
OFF
B8–B16
Tester connection to
terminal number
B4 – B7
B16 – B18
B7–B18
Specified value
Continuity
Continuity
Specified value
No continuity
Continuity
Specified value
Continuity
Continuity