Toyota Camry Manual page 203

AX2–16
AUTOMATIC TRANSAXLE –
PARK/NEUTRAL POSITION SWITCH
REPLACEMENT
1. DISCONNECT PARK/NEUTRAL POSITION SWITCH
CONNECTOR
2. REMOVE PARK/NEUTRAL POSITION SWITCH
(a) Remove the clip from the shift control cable.
(b) Remove the nut and control cable.
(c) Remove the transaxle control shaft lever.
(d) Remove the park/neutral position switch.
3. INSPECT PARK/NEUTRAL POSITION SWITCH
(See page AX2–116)
4. INSTALL AND ADJUST PARK/NEUTRAL POSITION
SWITCH
(a) Install the park/neutral position switch.
ON–VEHICLE REPAIR