Toyota Camry Manual page 919

BRAKE SYSTEM – LOAD SENSING PROPORTIONING VALVE (LSPV)
(d) Torque the lock nut.
Torque: 13 N–m (130 kgf–cm, 9 ft–lbf)
If it cannot be adjusted, replace the valve body.
LSPV REMOVAL
1. DISCONNECT BRAKE LINES
Using SST, disconnect the brake lines from the valve
body.
SST 09751–36011
2. REMOVE LSPV ASSEMBLY
(a) Remove the lock nut and disconnect the adjusting
bolt from the rear suspension arm.
(b) Remove the 2 mounting bolts and remove the LSPV
assembly.
LSPV INSTALLATION
1. INSTALL LSPV ASSEMBLY
(a) Install the valve assembly with the 2 mounting bolts.
Torque: 39 N–m (400 kgf–cm, 29 ft–lbf)
(b) Install the adjusting nut to the adjusting bolt and then
install the adjusting bolt to the rear suspension arm
with the lock nut.
BR–233