Toyota Camry Manual page 765

Hide thumbs Also See for Camry:

BRAKE SYSTEM

ANTI–LOCK BRAKE SYSTEM (ABS)

(l) Turn the selector switch to "FRONT LH" position.

(m) Repeat (c) to 6), checking the actuator operation sim–

(n) Similarly, inspect "REAR RH" and "REAR LH" position.

HINT: When inspecting "REAR LH" position, push the

REAR LH switch instead of the POWER SWITCH, and

you can inspect in any selector switch position.

(o) Push and hold in the MOTOR switch for a few sec–

(p) Stop the engine.

5. DISCONNECT ACTUATOR CHECKER (SST) FROM

Remove the "SHEET A" (SST) and disconnect the

actuator checker (SST) and sub–wire harness (SST)

from the actuator, control relay and body side wire

SST 09990–00150, 09990–00200, 09990–00210 ,

6. CONNECT CONNECTORS

(a) Connect the 2 connectors to the control relay.

(b) Connect the connector to the actuator.

7. CLEAR DIAGNOSTIC TROUBLE CODES

(See page BR–94)