Toyota Camry Manual page 597

BO–46
BODY – REAR DOOR
12. INSTALL DOOR GLASS
HINT: Insert a shop rag inside the panel to prevent
scratching the glass.
(a) Insert the glass to the frame.
(b) Temporarily tighten 2 glass mounting bolts.
13. Sedan:
INSTALL DOOR GLASS DIVISION BAR
Install the division bar with 2 bolts and the screw.
14. Wagon:
INSTALL REAR LOWER FRAME
Install the frame with the bolt and screw.
15. INSTALL REAR DOOR BELT MOULDING
Install the claw of the clips into the upper panel slit
and push the moulding onto the panel.
16. INSTALL DOOR GLASS RUN
Insert the glass run to the door frame.
17. ADJUST DOOR GLASS
Adjust the glass and tighten when dimension A and B,
as shown, are equal.
HINT: Substitute the bolt with washer for the center–
ing bolt.