Toyota Camry Manual page 941

BRAKE SYSTEM – ANTI–LOCK BRAKE SYSTEM (ABS)
REAR SPEED SENSOR REMOVAL
1. DISCONNECT SPEED SENSOR CONNECTOR
(a) Remove the seat cushion and side seatback.
(b) Disconnect the speed sensor connector, and pull out
the sensor wire harness with the grommet.
(c) Remove the 2 clamp bolts holding the sensor wire
harness to the body and shock absorber.
2. REMOVE SPEED SENSOR
Remove the speed sensor from the axle carrier.
REAR SPEED SENSOR INSTALLATION
1. INSTALL SPEED SENSOR
Install the speed sensor to the axle carrier.
Torque: 7.8 N–m (80 kgf–cm, 69 in.lbf)
2. CONNECT SPEED SENSOR CONNECTOR
(a) Pass the sensor harness through the body panel hole,
and connect the connector.
BR–255