Toyota Camry Manual page 52

AC–52
AIR CONDITIONING SYSTEM
WATER VALVE
WATER VALVE REMOVAL
1. DRAIN ENGINE COOLANT FROM RADIATOR
HINT: It is not necessary to drain out all the coolant.
2. DISCONNECT WATER VALVE CONTROL CABLE
FROM WATER VALVE
3. DISCONNECT WATER HOSE FROM WATER VALVE
4. REMOVE WATER VALVE
(a) Disconnect the water hose from the heater radiator
pipe.
(b) Remove the bolt and the water valve
WATER VALVE INSTALLATION
1. INSTALL WATER VALVE
(a) Push the water hose onto the heater radiator pipe as
far as rigs on the pipe and install the hose clip.
(b) Install water valve with the bolt.
2. CONNECT HEATER HOSE TO WATER VALVE
3. CONNECT WATER VALVE CONTROL CABLE TO
WATER VALVE
(a) Set the temperature control switch to "COOL".
(b) Set the water valve lever to "COOL", install the control
cable and lock the clamp.
HINT: Lock the clamp while lightly pushing the outer
cable in the direction shown by the arrow.
– WATER VALVE