Toyota Camry Manual page 366

TROUBLESHOOTING
The table below will be useful for you in troubleshooting these electrical problems. The most
likely causes of the malfunction are shown in the order of their probability. Inspect each part in
the order shown, and replace the part when it is found to be faulty.
Back–Up Light does not light up.
Back–Up Light remains always on.
Only one light does not light up.
BODY ELECTRICAL SYSTEM
Trouble
BACK–UP LIGHT SWITCH INSPECTION
INSPECT BACK–UP LIGHT SWITCH
Inspect the switch continuity between terminals.
PARK/ NEUTRAL POSITION SWITCH
(5S–FE Engine)
See page AX1–92.
(lMZ–FE Engine)
See page AX2–116.
– BACK–UP LIGHT SYSTEM
Parts name
1. GAUGE Fuse
2. Ignition Switch
3. Wire Harness
4. Bulb
1. Back–Up Light Switch (M/T)
2. Park/ Neutral Position Switch (A/T)
3. Wire Harness
1. Wire Harness
2. Bulb
Switch position Tester connection
Free
Push
If continuity is not as specified, replace the switch.
5S–FE (AX1–92)
1 MZ–FE (AX2– 116)
Specified value
No continuity
1 – 2
Continuity
BE–47
(See page)
(BE–4)
(BE–14)
(BE–47)