Toyota Camry Manual page 764

BR–78
BRAKE SYSTEM – ANTI–LOCK BRAKE SYSTEM (ABS)
(c) Place the "SHEET A" (SST) on the actuator checker.
SST 09990–00163
4. INSPECT BRAKE ACTUATOR OPERATION
(a) Start the engine, and run it at idle.
(b) Turn the selector switch of the actuator checker to
"FRONT RH" position.
(c) Push and hold in the MOTOR switch for a few sec–
onds.
(d) Depress the brake pedal and hold it until step (g) is com
pleted.
(e) Push the POWER SWITCH, and check that the brake
pedal does not go down.
NOTICE: Do not keep the POWER SWITCH pushed down
for more than 10 seconds.
(f) Release the switch, and check that the pedal goes
down.
(g) Push and hold in the MOTOR switch for a few sec
– onds, and check that the pedal returns.
(h) Release the brake pedal.
(i) Push and hold in the MOTOR switch for a few sec–
onds.
(j) Depress the brake pedal and hold it for about 15
seconds. As you hold the pedal down, push the
MOTOR switch for a few seconds. Check that the
brake pedal does not pulsate.
(k) Release the brake pedal.