Toyota Camry Manual page 356

TROUBLESHOOTING
The table below will be useful for you in troubleshooting these electrical problems. The most
likely causes of the malfunction are shown in the order of their probability. Inspect each part in
the order shown, and replace the part when it is found to be faulty.
'Hazard' and "Turn" do not light up.
The flashing frequency is abnormal.
Hazard warning light does not light up.
(Turn is normal)
Hazard warning light does not light up in one direction.
*1 Turn signal does not light up.
*2 Turn signal does not light up.
Turn signal does not light up in one direction.
Only one bulb does not light up.
*1: Combination Meter, Wiper and Washer do not operate.
*2: Combination Meter, Wiper and Washer are normal.
BODY ELECTRICAL SYSTEM
Trouble
– TURN SIGNAL AND HAZARD WARNING SYSTEM
Parts name
1. Hazard Warning Switch
2. Turn Signal Flasher
3. Wire Harness
1. Bulb
2. Turn Signal Switch
3. Wire Harness
1. HAZ–HORN Fuse
2. Wire Harness
1. Hazard Warning Switch
Z. Wire Harness
1. Ignition Switch
2. TURN Fuse
3. Turn Signal Switch
4. Wire Harness
1. TURN Fuse
2. Turn Signal Switch
3. Wire Harness
1. Turn Signal Switch
2. Wire Harness
1. Bulb
2. Wire Harness
BE–37
(See page)
(BE–38)
(BE–38)
(BE–38)
(BE–4)
(BE–38)
(BE–14)
(BE–4)
(BE–38)
(BE–4)
(BE–38)
(BE–38)