Toyota Camry Manual page 213

AX2–26
AUTOMATIC TRANSAXLE –
SIDE GEAR SHAFT OIL SEAL
REPLACEMENT
1. REMOVE BOTH DRIVE SHAFTS
(See page SA–22)
2. REMOVE BOTH SIDE GEAR SHAFT OIL SEALS
Using SST, pull out the oil seal.
SST 09308–00010
3. INSTALL LEFT SIDE GEAR SHAFT OIL SEAL
(a) Using SST, drive in a new oil seal.
SST 09223–15010
Oil seal depth:
0
(b) Coat the lip of oil seal with MP grease.
4. INSTALL RIGHT SIDE GEAR SHAFT OIL SEAL
(a) Using SST, drive in a new oil seal.
SST 09316–60010 (09316–00010)
Oil seal depth:
0 0.5 mm (0
(b) Coat the lip of oil seal with MP grease.
5. INSTALL BOTH DRIVE SHAFTS
(See page SA–25)
6. CHECK TRANSAXLE FLUID LEVEL
(See page AX2–68)
ON–VEHICLE REPAIR
0.5 mm (0 0.02 in.)
0.02 in.)