Toyota Camry Manual page 656

BODY – SLIDING ROOF
SLIDING ROOF INSTALLATION
1. INSTALL CABLE GUIDE CASING ASSEMBLY
(a) Apply adhesive tape to protect the body.
(b) Push the cable guide casing assembly rearwards to
remove it.
(c) Install 11 screws.
2. INSTALL WIND DEFLECTOR PANEL
Install the panel with 4 screws.
3. ADJUST DRIVE RAIL
HINT: Adjust the drive rail to a closed and tilted down
position.
Using a screwdriver, slide the link forwards or rear–
wards to align the 2 marks as shown.
BO–105