Toyota Camry Manual page 118

Hide thumbs Also See for Camry:

AUTOMATIC TRANSAXLE

4: Read the diagnostic trouble code indicated by the

number of times the O/D OFF indicator light blinks.

HINT: If the system is operating normally, the light will

blink 2 times per second.

Diagnostic trouble code "42" is shown as an example.

HINT: When 2 or more trouble codes are stored in

memory, the lower–numbered code is displayed first.

If no diagnostic trouble code is output, or if a diagnos–

tic trouble code is output even though no diagnostic

trouble code output operation is performed, check the

TE1 terminal circuit on page AX1–110.

DIAGNOSTIC TROUBLE CODE CHECK BY

USING TOYOTA HAND–HELD TESTER

1. Hook up the TOYOTA hand–held tester to the DLC2.

2. Read the diagnostic trouble codes by following the

prompts on the tester screen.

Please refer to the TOYOTA hand–held tester

operator's manual for further details.

CANCELLING DIAGNOSTIC TROUBLE

After repair of the trouble area, the diagnostic trouble

code retained in the ECM memory must be cancelled

out by removing the EM fuse for 10 seconds or more,

with the ignition switch off.

Check that the normal code is output after connecting

TROUBLESHOOTING