Toyota Camry Manual page 136

AUTOMATIC TRANSAXLE –
MANUAL SHIFTING TEST
HINT: With this test, it can be determined whether the
trouble is within the electrical circuit or is a mechani–
cal problem in the transaxle.
1. DISCONNECT SOLENOID WIRE
2. INSPECT MANUAL DRIVING OPERATION
Check that the shift and gear positions correspond
with the table below.
Shift Position
HINT: If the L, 2 and D position gear positions are
difficult to distinguish, perform the following road
test.
While driving, shift through the L, 2 and D positions.
Check that the gear change corresponds to the shift
position.
If any abnormality is found in the above test, the
problem is in the transaxfe itself.
3. CONNECT SOLENOID WIRE
4. CANCEL OUT DIAGNOSTIC TROUBLE CODE
(See page AX1–45)
TROUBLESHOOTING
D Position
2 Position
L Position
R Position
P Position
AX1–63
Gear Position
O/D
3rd
Reverse
Pawl Lock