Toyota Camry Manual page 800

BR–114
INSPECTION PROCEDURE
Check voltage between terminals
ground.
Check continuity between terminals
A4 5,
BRAKE SYSTEM
A4 5 and A13 6.
– LOCK BRAKE SYSTEM (ABS)
1 of ABS control relay and body
Disconnect the ABS control relay connector.
Measure voltage between terminals A6 1 of ABS
control relay harness side connector and body
ground.
Voltage: 10–14 V
Check and repair harness or connector.
2 and
Disconnect the 2 connectors from ABS actuator.
Check continuity between terminals A6 2 and
A5 3, A5 3 and A4 5,
Continuity
HINT: There is a resistance of 4–6
terminals A5 3 and A4 5.
Repair or replace harness or ABS actuator.
3 and
A4 5 and A13 6.
W
between