Toyota Camry Manual page 714

BR–28
BRAKE SYSTEM – FRONT BRAKE(Single–Piston Type)
4. INSTALL CYLINDER BOOT AND CYLINDER BOOT
SET RING
CALIPER INSTALLATION
1. INSTALL 2 BRAKE PADS
Install the inside and outside pads.
2. INSTALL CALIPER
(a) Temporarily install the caliper on the torque plate with
the 2 installation bolts.
(b) Hold the sliding pin and torque the installation bolt.
Torque: 34 N–m (350 kgf–cm, 25 ft–lbf)
3. CONNECT FLEXIBLE HOSE
Install the flexible hose on the caliper with 2 new
gaskets.
Torque: 29 N–m (300 kgf–cm, 21 ft–lbf)
HINT: Install the flexible hose lock securely in the lock
hole in the caliper.
4. FILL BRAKE RESERVOIR WITH BRAKE FLUID AND
BLEED BRAKE SYSTEM
(See page BR–9)
5. CHECK FOR LEAKS