Toyota Camry Manual page 899

BRAKE SYSTEM – REAR BRAKE(Disc Brake)
BRAKE PADS REPLACEMENT
1. REMOVE REAR WHEEL
Remove the wheel and temporarily fasten the disc
with the hub nuts.
2. INSPECT PAD LINING THICKNESS
Check the pad thickness through the caliper inspec–
tion hole and replace pads if not within specification.
Minimum thickness:
1.0 mm (0.039 in.)
3. LIFT UP CALIPER
(a) Remove the flexible hose bracket.
(b) Remove the installation bolt from the torque plate.
(c) Lift up the caliper and suspend the caliper with string.
HINT: Do not disconnect the flexible hose from the
caliper.
BR–213