Toyota Camry Manual page 830

BR–144
BRAKE SYSTEM – ANTI–LOCK BRAKE SYSTEM (ABS)
DIAGNOSTIC TROUBLE CODE CHECK
USING TOYOTA HAND–HELD TESTER
1. Hook up the Toyota hand–held tester to the DLC2.
2. Read the diagnostic trouble codes by following the prompts
on the tester screen.
Please refer to the Toyota hand–held tester operator's
manual for further details.
DIAGNOSTIC TROUBLE CODE CLEARANCE
1. Using SST, connect terminals Tc and E1 of DLC2 or DLC1.
SST 09843–18020
2. IG switch ON.
3. Clear the diagnostic trouble codes stored in ECU by de–
pressing the brake pedal 8 or more times within 3 seconds.
4. Check that the warning light shows the normal code.
5. Remove the SST from the terminals of DLC2 or DLC1.
HINT: Cancellation cannot be done by removing the battery
cable or ECU–13 fuse.