Toyota Camry Manual page 94

AUTOMATIC TRANSAXLE –
TRANSAXLE REMOVAL
CAUTION: Work must be started after 90 seconds from
the time the ignition switch is turned to the "LOCK"
position and the negative (–) terminal cable is discon–
nected from the battery.
1. DISCONNECT NEGATIVE (–) TERMINAL CABLE
FROM BATTERY
2. REMOVE AIR CLEANER ASSEMBLY
3. REMOVE THROTTLE CABLE FROM ENGINE
w/ Cruise Control System:
4. REMOVE CRUISE CONTROL ACTUATOR COVER
5. DISCONNECT CONNECTOR FROM CRUISE CON–
TROL ACTUATOR
6. REMOVE GROUND TERMINAL
7. DISCONNECT CONNECTOR FROM VEHICLE SPEED
SENSOR
ASSEMBLY REMOVAL AND INSTALLATION
AX1–21