Toyota Camry Manual page 55

AIR CONDITIONING SYSTEM
BLOWER MOTOR
BLOWER MOTOR REMOVAL
1. REMOVE INSTRUMENT LOWER PANEL AND
UNDER COVER NO. 2
(See page BO–108)
2. REMOVE CONNECTOR BRACKET
Remove the 2 screws and the bracket
3. REMOVE MOTOR
(a) Disconnect the connector.
(b) Remove the 3 screws and the motor.
BLOWER MOTOR INSPECTION
INSPECT BLOWER MOTOR OPERATION
Connect the positive (+) lead from the battery to
terminal 2 and the negative (–) lead to terminal 1,
then check that the motor operation is smooth.
BLOWER MOTOR INSTALLATION
1. INSTALL MOTOR
(a) Install the motor with the 3 screws.
(b) Connect the connector.
2. INSTALL CONNECTOR BRACKET
3. INSTALL INSTRUMENT LOWER PANEL AND
UNDER COVER NO. 2
– BLOWER MOTOR
AC–55