Toyota Camry Manual page 361

BE–42
Tester connection to
terminal number
BODY ELECTRICAL SYSTEM
PERSONAL LIGHT INSPECTION
INSPECT PERSONAL LIGHT SWITCH
Continuity
Inspect the light switch continuity between terminals.
Switch position
OFF
The number in bracket ( ) applies to vehicles with
Sliding Roof System.
If continuity is not as specified, replace the light as–
sembly or bulb.
INTEGRATION RELAY INSPECTION
INSPECT INTEGRATION RELAY
Relay Circuit/ Illuminated Entry System
Remove the relay from junction block and inspect the
connector on the junction block side, as shown in the
chart.
Condition
Door Outside Handle Switch Position OFF
Door Outside Handle Switch Position ON
Courtesy Switch Position OFF
(except driver's side)
Courtesy Switch Position ON
(except driver's side)
Constant
Condition
Constant
Constant
If circuit is as specified, trying replacing the relay with
a new one.
If the circuit is not as specified, inspect the circuits
connected to other parts.
– INTERIOR LIGHT SYSTEM
Tester connection to
terminal number
1–2
1 –(4)
Specified value (Continuity)
No continuity
Continuity
No continuity
Continuity
Continuity
Battery positive voltage
Battery positive voltage
Specified value
No continuity
Continuity
Specified value (Voltage)