Toyota Camry Manual page 259

AX2–72
EVALUATION
Problem
(a) Stall speed low in D and R positions.
(b) Stall speed high in D position.
(c) Stall speed high in R position.
(d) Stall speed high in D and R position.
AUTOMATIC TRANSAXLE –
Engine output may be insufficient.
Stator one–way clutch is operating properly
HINT:
If more than 600 RPM below the specified value, the
torque converter could be faulty.
Line pressure too low
Forward clutch slipping
No.2 one–way clutch not operating properly
O/D one–way clutch not operating properly
Line pressure too low
Direct clutch slipping
First and reverse brake slipping
O/D clutch slipping
Line pressure too low
Improper fluid level
O/D one–way clutch not operating properly
TROUBLESHOOTING
Possible cause