Toyota Camry Manual page 988

BR–302
Tc Terminal Circuit
CIRCUIT DESCRIPTION
Connecting terminals Te and E1 of the DLC1 or the DLC2 causes the ECU to display the diagnostic
trouble code by flasing the ABS warning light.
DIAGNOSTIC CHART
Check voltage between terminals Tc and E1 of
DLC2 or DLC 1.
Check for open and short in harness and connec–
tor between ABS ECU and DLC2 or DLC1, DLC2
or DLC1 and body ground (See page IN–28).
Check and replace ABS ECU.
BRAKE SYSTEM – ANTI–LOCK BRAKE SYSTEM (ABS)
If ABS warning light does not blink
even after Tc and E1 are connected,
the ECU may be defective.*
Repair or replace harness or connector.
*: Provided that the harness between
terminal Tc of DLC2 or DLC1 and
terminal Te of ECU is not open.