Toyota Camry Manual page 173

AX1–100
INSPECTION PROCEDURE
Check shift pattern switch operation.
Check that the shift point changes when the pattern select switch is operated.
Check PWR indicator light.
Measure voltage between terminal 6 of pattern select switch and body
ground.
AUTOMATIC TRANSAXLE –
Turn IG switch 4N.
Check that the PWR indicator light lights up when
you push the pattern select switch to PWR.
(1) Push pattern select switch to NORMAL.
(2) Turn IG switch ON.
Measure voltage between terminal 6 of pattern
select switch connector and body ground.
Voltage: 10–14 V
TROUBLESHOOTING
Proceed to next circuit inspection shown
on matrix chart (See page AX1–68).
Go to step
Check and repair pattern select switch
power source circuit.