Toyota Camry Manual page 606

BODY – LUGGAGE COMPARTMENT
TORSION BAR REMOVAL AND
INSTALLATION
1. REMOVE FOLLOWING PARTS:
(a) Rear floor finish plate
(b) Rear luggage trim
(c) Right side luggage trim
(d) Left side luggage trim
2. REMOVE TORSION BAR
(a) Remove the torsion bar from center bracket.
(b) Install SST to the torsion bar on the hinge side.
SST 09804–24010
(c) Push down on SST, and pull the luggage compartment
door hinge from the torsion bar.
(d) Slowly lift SST, and remove the torsion bar from the
torsion bar bracket with SST.
(e) Remove the torsion bar.
(f) Do the same for the other side.
3. INSTALL TORSION BAR
(a) Insert the torsion bar into the bracket as shown.
BO–55