AX2–94
INSPECTION PROCEDURE
Measure voltage between terminals SP 1 and E 1 of ECM connector.
Measure voltage between terminal 14 of combination meter center
connector and body ground.
Check combination meter.
AUTOMATIC TRANSAXLE
–
TROUBLESHOOTING
1. Disconnect cruise control ECU connector.
2. Turn IG switch ON.
Measure voltage between terminals SP1 and E1 of
ECM connector.
Voltage: 5 V
Go to step
1. Remove the combination meter, but do not
disconnect the connectors.
2. Turn 1 G switch ON.
Measure voltage between terminal 4 of combina–
tion meter connector and body ground.
Voltage: 5 V
Check for open circuit between ECM
and combination meter.