Toyota Camry Manual page 102

AUTOMATIC TRANSAXLE –
(d) Torque the nuts.
Nut
(c) Install the 2 set screws in the right and left fender
liners.
9. INSTALL STEERING GEAR HOUSING
(a) Install the steering gear housing to the front frame
assembly.
(b) Install and torque the 2 bolts and nuts.
Torque: 181 N–m (1,850 kgf–cm, 134 ft–lbf)
(c) Connect the stabilizer bar bushing bracket with the 4
bolts.
Torque: 19 N–m (195 kgf–cm, 14 ft–lbf)
10. INSTALL 4 TRANSAXLE MOUNTING BOLTS
Torque: 52 N–m (530 kgf–cm, 38 ft–lbf)
ASSEMBLY REMOVAL AND INSTALLATION
Torque: 36 N–m (370 kgf–cm. 27 ft–lbf)
AX1–29