Toyota Camry Manual page 100

Hide thumbs Also See for Camry:

AUTOMATIC TRANSAXLE

35. REMOVE TRANSAXLE ASSEMBLY

Separate transaxle and engine, and lower the trans–

36. REMOVE TORQUE CONVERTER CLUTCH FROM

TRANSAXLE INSTALLATION

1. INSTALL TORQUE CONVERTER CLUTCH IN TRA–

If the torque converter clutch has been drained and

washed, refill with new ATF.

ATF DEXRON _ W

2. CHECK TORQUE CONVERTER CLUTCH INSTALLA–

Using a scale and a straight edge, measure from the

installed surface to the front surface of the transaxle

Correct distance:

13.0 mm (0.51 in.) or more

3. ALIGN TRANSAXLE AT INSTALLATION POSITION

(a) Align the 2 knock pins on the block with the converter

(b) Temporarily install the bolt.

4. INSTALL TRANSAXLE TO ENGINE BOLT

Install the transaxle to engine bolts.

12 mm head bolt

Torque: 64 N–m (650 kgf–cm, 47 ft–lbf)

ASSEMBLY REMOVAL AND INSTALLATION