Toyota Camry Manual page 98

AUTOMATIC TRANSAXLE –
28. REMOVE ENGINE 4 TRANSAXLE MOUNTING
BOLTS
29. REMOVE STEERING GEAR HOUSING
(a) Remove the 4 bolts and disconnect stabilizer bar bus–
hing bracket from the front frame assembly.
(b) Remove the 2 bolts and nuts from the steering gear
housing.
(c) Remove the steering gear housing.
30. REMOVE FRONT FRAME ASSEMBLY
(a) Hold the front frame assembly with a jack.
(b) Remove the 2 set screws from the right and left
fender liners.
(c) Remove the 6 bolts and 4 nuts.
(d) Remove the front frame assembly.
ASSEMBLY REMOVAL AND INSTALLATION
AX1–25