Toyota Camry Manual page 997

BRAKE SYSTEM – ANTI–LOCK BRAKE SYSTEM (ABS)
DIAGNOSIS SYSTEM
INDICATOR CHECK
When the ignition switch is turned ON, check that the ABS
warning light goes on for 3 seconds.
HINT: If the indicator check result is not normal, proceed to
troubleshooting for the ABS warning light circuit (See page BR–
177).
DIAGNOSTIC TROUBLE CODE CHECK
1. Using SST, connect terminals Tc and E1 of DLC2 or DLC1.
SST 09843–18020
2. Turn the ignition switch to ON.
3. Read the diagnostic trouble code from the ABS warning
light on the combination meter.
HINT: If no code appears, inspect the diagnostic circuit
or ABS warning light circuit (See page
As an example, the blinking patterns for normal code and
codes 11 and 21 are shown on the left.
4. Codes are explained in the code table on page BR–145.
5. After completing the check, disconnect terminals Tc and
E1, and turn off the display.
If 2 or more malfunctions are indicated at the same time,
the lowest numbered diagnostic trouble code will be
displayed first.
BR–311
BR–180 or BR–177y.