AIR CONDITIONING SYSTEM
BLOWER UNIT
BLOWER UNIT REMOVAL
1.
REMOVE GLOVE COMPARTMENT
(See page BO–108)
2.
REMOVE ECU AND ECU BRACKET
3.
REMOVE CONNECTOR BRACKET
(a) Disconnect the connector from the connector brack–
et.
(b) Remove the 2 screws and the bracket.
4.
REMOVE BLOWER UNIT
(a) Disconnect the connector from the blower unit.
(b) Disconnect the air inlet damper control cable.
(c) Remove the 3 screws, nut and the blower unit.
BLOWER UNIT INSTALLATION
1.
INSTALL BLOWER UNIT
(a) Install the blower unit with the 3 screws and the nut.
(b) Connect the air inlet damper control cable to the
blower unit.
(c) Connect the connector.
2.
INSTALL CONNECTOR BRACKET
3.
INSTALL ECU BRACKET AND ECU
4.
INSTALL GLOVE COMPARTMENT
–
BLOWER UNIT
AC–35