Toyota Camry Manual page 369

BE–50
TROUBLESHOOTING
The. table below will be useful for you in troubleshooting these electrical problems. The most
likely causes of the malfunction are shown in the order of their probability. Inspect each part in
the order shown, and replace the part when it is found to be faulty.
Stop light does not light up.
Only one light always lights up.
Only one light does not light.
BODY ELECTRICAL SYSTEM
Trouble
STOP LIGHT SWITCH INSPECTION
INSPECT STOP LIGHT SWITCH
Continuity
Inspect the switch continuity between terminals.
Switch pin pushed in
– STOP LIGHT SYSTEM
Parts name
1. STOP Fuse
2. Stop Light Switch
3. Wire Harness
1. Wire Harness
1. Bulb
2. Wire Harness
Tester connection to
Switch position
terminal number
Switch pin free
If continuity is not as specified, replace the switch.
Specified value
1–2 Continuity
Continuity
3–4
(See page)
(BE–4)
(BE–50)