BE–58
BODY ELECTRICAL SYSTEM
WASHER MOTOR INSPECTION
(WAGON Only)
INSPECT WASHER MOTOR
Front Washer Operation
Connect the positive (+) lead from the battery to
terminal 2 and the negative (–) lead to terminal 1,
check that the motor operates.
NOTICE: These tests must be performed quickly (within
20 seconds) to prevent the coil from burning out.
If operation is not as specified, replace the motor.
Rear Washer Operation
Connect the positive (+) lead from the battery to
terminal 2 and the negative (–) lead to terminal 3,
check that the motor operates.
If operation is not as specified, replace the motor.
(Ex. WAGON)
INSPECT WASHER MOTOR
Operation
Connect the positive (+) lead from the battery to
terminal 2 and the negative (–) lead to terminal 1,
check that the motor operates.
NOTICE: There tests must be performed quickly (within
20 seconds) to prevent the coil from burning out.
If operation is not as specified, replace the motor.
–
WIPER AND WASHER SYSTEM
NOTICE: These tests must be performed quickly (within
20 seconds) to prevent the coil from burning out.