Toyota Camry Manual page 101

AX1–28
AUTOMATIC TRANSAXLE –
10 mm head bolt
Torque: 46 N–m (470 kgf–cm, 34 ft–lbf)
5. INSTALL TORQUE CONVERTER CLUTCH MOUNT–
ING BOLT
(a) Clean the threads of the bolts with the gasoline.
(b) Coat the threads of the bolts with sealer.
Sealer:
Part No.08833–00070, THREE BOND 1324 or equi–
valent.
(c) Tighten the bolts evenly.
Torque: 27 N–m (280 kgf–cm, 20 ft–Ibf)
HINT: First install dark green colored bolt and then the
5 bolts.
6. INSTALL REAR END PLATE
Install the rear end plate with the 4 bolts.
7. INSTALL STIFFENER PLATE
(a) Install the stiffener plate with the 3 bolts.
(b) Torque the 3 bolts.
Torque: 37 N–m (380 kgf–cm, 27 ft–lbf)
8. INSTALL FRONT FRAME ASSEMBLY
(a) Hold the front frame assembly with a jack.
(b) Install the front frame assembly with the 6 bolts and 4
nuts.
(c) Torque the bolts.
19 mm head bolt
Torque: 181 N–m (1,850 kgf–cm, 134 ft–lbf)
12 mm head bolt
Torque: 32 N–m (330 kgf–cm, 24 ft–lbf)
ASSEMBLY REMOVAL AND INSTALLATION