Toyota Camry Manual page 209

AX2–22
AUTOMATIC TRANSAXLE –
5. INSTALL TRANSFER LUBRICATION APPLY TUBE
AND DETENT SPRING
(a) Using a plastic hammer, install the tube into the posi–
tion indicated in the illustration.
NOTICE: Be careful not to bend or damage the tube.
(b) Install the bolt.
HINT: The bolt length (mm, in.) is indicated in the
illustration.
Torque: 11 N–m (170 kgf–cm, 8 ft–lbf)
(c) Install the detent spring.
HINT: Each bolt length (mm, in.) is indicated in the
illustration.
Torque: 11 N–m (110 kgf–cm, 8 ft–lbf)
(d) Check that the manual valve lever is in contact with
the center of the roller at the tip of the detent spring.
6. CONNECT SOLENOID CONNECTORS
7. INSTALL OIL TUBES
(a) Using a plastic hammer, install the tubes into the
positions indicated in the illustration.
NOTICE: Be careful not to bend or damage the tubes.
ON–VEHICLE REPAIR