Toyota Camry Manual page 801

Check ABS
Check for open and short in harness and connector between ABS
control relay and ABS ECU (See page
If the same code is still output after the diagnostic trouble code is deleted, check the contact condition
of each connection. If the connections are normal, the ECU may be defective.
BRAKE SYSTEM
control relay.
– LOCK BRAKE SYSTEM (ABS)
Check continuity between each terminal of ABS
control relay.
Terminals
3 and
Terminals 1 and
1. Apply battery positive voltage between termi–
nals A6 3 and A6 4.
2. Check continuity between each terminal of
ABS control relay.
Terminals
1 and
Replace ABS control relay.
).
IN–28
Repair or replace harness or connector.
BR–115
Continuity (Reference
value 62W)
Open
Continuity