Description; Distance Bgp - Dell Force10 S4810P Reference Manual

description

Enter a description of the BGP routing protocol
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax description {description}
To remove the description, use the no description {description} command.
Parameters
description
Defaults none
Command Modes ROUTER BGP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
pre-7.7.1.0
Related
router bgp
Commands

distance bgp

Define an administrative distance for routes.
C-Series, E-Series TeraScale, Z-Series, S-Series
Syntax distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-distance
internal-distance
local-distance
Defaults
Enter a description to identify the BGP protocol (80 characters
maximum).
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced.
– enters ROUTER mode on the switch.
Enter a number to assign to routes learned from a neighbor external
to the AS. The range is 1 to 255. The default is 20.
Enter a number to assign to routes learned from a router within the
AS. The range is 1 to 255. The default is 200.
Enter a number to assign to routes learned from networks listed in the
network command. The range is 1 to 255. The default is 200.
• external-distance = 20
• internal-distance = 200
• local-distance = 200
379