Distance Bgp - Dell Z9500 Command Reference Manual

Version
8.3.7.0
7.8.1.0
7.7.1.0
7.6.1.0

distance bgp

Configure three administrative distances for routes.
Z9500
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-
distance
internal-
distance
local-distance
Defaults
•
•
•
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.7.0
7.8.1.0
488
Description
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced IPv6 MGBP support for the E-Series.
Enter a number to assign to routes learned from a neighbor
external to the AS. The range is from 1 to 255. The default is
20.
Enter a number to assign to routes learned from a router
within the AS. The range is from 1 to 255. The default is 200.
Enter a number to assign to routes learned from networks
listed in the network command. The range is from 1 to 255.
The default is 200.
external-distance = 20
internal-distance = 200
local-distance = 200
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series.
Border Gateway Protocol