Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Management_ACL.fm
8
Management ACL Commands
management access-list
The management access-list Global Configuration mode command
configures a management access list and enters the Management Access-List
Configuration command mode. Use the no form of this command to delete
an access list.
Syntax
name
management access-list
name
no management access-list
Parameters
name—Specifies the access list name. (Length: 1–32 characters)
Command Mode
Global Configuration mode
User Guidelines
Use this command to configure a management access list. This command
enters the Management Access-List Configuration mode, where the denied
or permitted access conditions are defined with the deny and permit
commands.
If no match criteria are defined, the default value is deny.
When re-entering the access-list context, the new rules are entered at the end
of the access list.
Use the management access-class command to select the active access list.
The active management list cannot be updated or removed.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
151
Management ACL Commands
Advertisement
Table of Contents
