Ethernet/Ip Parameters Adapter 2 - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters

16.32.4 EtherNet/IP Parameters Adapter 2

#81570+20(a-1)
Specify the PLC project No. that is assigned to Adapter Explicit (IN/OUT) area. (a=1 to 6)
This number is set as the project No. of PLC device for input/output to/from Adapter Explicit (IN/OUT) area.
---Setting range---
1 to 6
#81571+20(a-1)
Specify the offset (bytes) from the head of Adapter Explicit (IN) area. (a=1 to 6)
The data starting from the specified offset is sent from Adapter Explicit (IN) area to PLC device.
Example) 100
---Setting range---
0 to 1388
#81572+20(a-1)
Specify the name of PLC device to which Adapter Explicit (IN) area data is transferred. (a=1 to 6)
Example) M
---Setting range---
M, L, SB, B, SW, D, R, W
#81573+20(a-1)
Specify the top No. of PLC device to which Adapter Explicit (IN) area data is transferred. (a=1 to 6)
If you specify bit device, set it in increments of 16 points.
Example) 512
---Setting range---
M: 0 to 61424
L: 0 to 32752
SB: 0 to 7FF0
B: 0 to EFF0
SW: 0 to 7FFF
D: 0 to 32767
W: 0 to 7FFF
R: 8300 to 9799, 9800 to 9899, 18300 to 19799, 19800 to 19899, 28300 to 29799, 29800 to 29899
#81574+20(a-1)
Specify the size (bytes) of Adapter Explicit (IN) area data that is transferred to PLC device. (a=1 to 6)
Example) 1
---Setting range---
0 to 1389 (bytes)
* Up to 1389 bytes in total for all areas
#81575+20(a-1)
Specify the offset (bytes) from the head of Adapter Explicit (OUT) area. (a=1 to 6)
The PLC device data starting from the specified offset is sent to Adapter Explicit (OUT) area.
Example) 100
---Setting range---
0 to 1388
IB-1501279-H
Exp A1 Proj No.
Exp A1in offset
Exp A1in dev name
Exp A1in dev No.
Exp A1in dev size
Exp A1out offset
712
Adapter function Explicit Message: PLC project No.
Adapter function Explicit Message: IN area top offset
Adapter function Explicit Message: PLC device name
(IN)
Adapter function Explicit Message: PLC device top No.
(IN)
Adapter function Explicit Message: PLC device size (IN)
Adapter function Explicit Message: OUT area top offset