Mitsubishi Electric M800 Series Manual page 295

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
#8311 P7 (for L system only)
Set the area of the left spindle section.
Set the coordinate from the center of workpiece (P0) for X-axis. (radius value)
Set the coordinate value by basic machine coordinate system for Z-axis.
---Setting range---
-99999.999 to 99999.999 (mm)
#8312 P8 (for L system only)
Set the area of the left spindle section.
Set the coordinate from the center of workpiece (P0) for X-axis. (radius value)
Set the coordinate value by basic machine coordinate system for Z-axis.
---Setting range---
-99999.999 to 99999.999 (mm)
#8313 P9 (for L system only)
Set the area of the right spindle section.
X axis: Set the coordinate from the workpiece center (P0). (radius value)
Z axis: Set the coordinates in the basic machine coordinate system.
---Setting range---
-99999.999 to 99999.999 (mm)
#8314 P10 (for L system only)
Set the area of the right spindle section.
Set the coordinate from the center of workpiece (P0) for X-axis. (radius value)
Set the coordinate value by basic machine coordinate system for Z-axis.
---Setting range---
-99999.999 to 99999.999 (mm)
#8315 Barrier Type (L) (for L system only)
Select the shape of the left chuck and tailstock barrier.
0: No area
1: Chuck
2: Tailstock
#8316 Barrier Type (R) (for L system only)
Select the shape of the right chuck and tailstock barrier.
0: No area
1: Chuck
2: Tailstock
#8317 ELIV. AX. Name (for L system only)
Set the name of the delivery axis when the right chuck and tailstock barrier is movable.
When using the multi-part system method and the delivery axis is an axis in the other part system, designate
the axis including the part system as 1A, 1B or 2A, 2B. If the part system is not designated as A and B, the
set part system will be used.
---Setting range---
A/B/.. (axis name)
1A/1B/..
2A/2B/.. (with part system designated)
0: Cancel
IB-1501279-H 278