Mitsubishi Electric M800 Series Manual page 397

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#1043 lang
Select the display language.
0: English (Standard)
1: Japanese (Standard)
11: German (Option)
12: French (Option)
13: Italian (Option)
14: Spanish (Option)
15: Traditional Chinese (Option)
16: Korean (Option)
17: Portuguese (Option)
18: Dutch (Option)
19: Swedish (Option)
20: Hungarian (Option)
21: Polish (Option)
22: Simplified Chinese (Option)
23: Russian (Option)
24: Turkish (Option)
25: Czech (Option)
(Note) A language which can be displayed is different according to each series.
(PR) #1044 auxno
Set the number of MR-J2-CTs connected.
(Note) The number of MR-J2-CTs possible to connect and setting range are different according to the model.
Check the specifications of each series.
(PR) #1045 nskno
Specify the number of NSK megatorque motors connected. When a value other than 0 is specified, 2nd mis-
cellaneous function data is output as signed binary data.
---Setting range---
0 to 16
(PR) #1046 T-ofs disp type
Set this parameter to 1 when you use the L system's tool compensation type (e.g. when using a turning tool)
in the M system.
0: Use the compensation type specified by "#1037 cmdtyp"
1: Use the tool compensation type III, irrespective of "#1037 cmdtyp"
(Note that the type is not switched to III on the tool measurement screen.)
(PR) #1047 G_Chg_En_Sno
[M8]
Select the part system for which you enable the program format switch.
0: Part system 1 (default)
1: Part system 1
2: Part system 2
If G188 is given to any other part system, a program error (P29) occurs. If PFCHR is turned ON in any other
part system, it is ignored.
[C80]
Not used.
(PR) #1051 MemTol
0: Tool compensation memory separate for part systems
1: Tool compensation memory common for part systems
IB-1501279-H
Select language displayed
MR-J2-CT Connections
Megatorgue motor connections
Tool compensation display type switch (for M system
only)
Select program format switch-enabled part system
Tool compensation memory common for part systems
380