Mitsubishi Electric M800 Series Manual page 703

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
(PR) #12625 tool rot ax type
[M8]
Select about which axis the tool rotation axis rotates.
(Note) When "#12624 tool rot ax name" is not set, this parameter is disabled.
If "0: Disable" is selected when "#12624 tool rot ax name" is set, this parameter is treated as "2: J axis".
0: Disable
1: I axis
2: J axis
3: K axis
(PR) #12626 tool rot dir
[M8]
Select the tool rotation axis direction.
(Note) When "#12624 tool rot ax name" is not set, this parameter is disabled.
0: Right-handed system
1: Left-handed system
(PR) #12627 main sp no
[M8]
Specify the spindle No. of the front side work spindle.
When this parameter is set to 0, the spindle No. is treated as 1.
---Setting range---
0 to the number of spindles
(PR) #12628 sub sp no
[M8]
Specify the spindle No. of the rear side work spindle.
If there is no rear-side work spindle, set this parameter to 0.
---Setting range---
0 to the number of spindles
(PR) #12629 main sp rot dir
[M8]
Specify the rotation direction of the front side work spindle.
0: Right-handed system
1: Left-handed system
(PR) #12630 sub sp rot dir
[M8]
Specify the rotation direction of the rear side work spindle.
0: Right-handed system
1: Left-handed system
(PR) #12631 main chuck close M
[M8]
Specify the M code allocated to the front chuck closing.
---Setting range---
0 to 99999999
(PR) #12632 sub chuck close M
[M8]
Specify the M code allocated to the back chuck closing.
---Setting range---
0 to 99999999
IB-1501279-H
Select tool rotation axis (For L system only)
Tool rotation axis direction (For L system only)
Front spindle No. (For L system only)
Rear spindle No. (For L system only)
Front spindle rotation direction (For L system only)
Rear spindle rotation direction (For L system only)
Front chuck close M code (For L system only)
Back chuck close M code(For L system only)
686