Mitsubishi Electric M800 Series Manual page 382

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
(PR) #12009 Tfig
Set the number of T that can be specified within the same block.
---Setting range---
1 to 4
(PR) #12010 Tbin
Data type 0 BCD
Data type 1 Unsigned binary
Data type -1 Singed binary
<For unsigned binary>
The absolute value "1" is output for "-1".
<For singed binary>
"-1" is output as "0xFFFFFFFF".
---Setting range---
Data type
(-1,0,1)
(PR) #12011 Bfig
Set the number of T that can be specified within the same block.
---Setting range---
1 to 4
(PR) #12012 Bbin
Data type 0 BCD
Data type 1 Unsigned binary
Data type-1 Singed binary
<For unsigned binary>
The absolute value "1" is output for "-1".
<For singed binary>
"-1" is output as "0xFFFFFFFF".
---Setting range---
Data type
(-1,0,1)
#12013 G33.n rot
Select the axis to use as C axis with its axis name.
---Setting range---
A to Z
#12014 G33.n ovr
Not used.
Number of T
T binary
Number of B
B binary
G33.n rotary axis name
G33.n override
365 IB-1501279-H