Host2 Host Name; Host2 User Name; Host2 Password; Host2 Directory - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
15 User Parameters
#9731

Host2 host name

[M8]
Set the host computer name.
This parameter allows the NC to easily recognize the host computer on the network. Set the host computer's
name (name registered in C:\windows\hosts) or the IP address.
<Setting example>
For host name: mspc160
For IP address: 150.40.0.111
(Note) Set the host computer's TCP/IP address if communication is not carried out correctly.
---Setting range---
15 characters (alphanumeric) or less
[C80]
Not used.
#9732

Host2 user name

[M8]
Set the user name when logging into the host computer.
---Setting range---
15 characters (alphanumeric) or less
[C80]
Not used.
#9733

Host2 password

[M8]
Set the password when logging into the host computer.
---Setting range---
15 characters (alphanumeric) or less
[C80]
Not used.
#9734

Host2 directory

[M8]
Set the directory name of the host computer.
The directory released to the client (NC unit) with the host computer's server is handled as the root directory
by the NC unit.
---Setting range---
31 characters (alphanumeric) or less
[C80]
Not used.
IB-1501279-H 260