Mitsubishi Electric M800 Series Manual page 657

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#7313 Tmac Program No.
Set the program No. for when calling the macro with a T command.
This is valid when "#1197 Tmac" is set to "1".
The setting method is same as "M call macro".
---Setting range---
Program name or file name (up to 32 characters)
#7314 Man Tmac prg No.
[M8]
Specify the macro program number to be called with the T code input through a manual numerical value com-
mand.
When a nonzero value is set in the parameter, macro call is executed irrespective of the setting of "#1197
Tmac".
---Setting range---
Program name or file name (up to 32 characters)
(Entering "0" clears the setting value.)
#7322 G200 type
Specify the macro call type.
0: Equivalent to M98 P ****;
1: Equivalent to G65 P ****;
2: Equivalent to G66 P ****;
3: Equivalent to G66.1 P ****;
---Setting Range---
0 to 3
#7323 G200 program No.
Specify the figures in the hundreds and higher places of the macro program No. to be called.
---Setting Range---
90 to 99, or 1000100 to 1999999
(Note) To set the program No. to "1000100 to 1999999", set the macro call out type to 0 (M98) or 1 (G65).
#7332 G300 type
The setting method is same as "#7322".
#7333 G300 program No.
The setting method is same as "#7323".
#7342 G400 type
The setting method is same as "#7322".
#7343 G400 program No.
The setting method is same as "#7323".
#7352 G500 type
The setting method is same as "#7322".
#7353 G500 program No.
The setting method is same as "#7323".
#7362 G600 type
The setting method is same as "#7322".
#7363 G600 program No.
The setting method is same as "#7323".
#7372 G700 type
The setting method is same as "#7322".
IB-1501279-H 640