Base Unit A Configuration Error; Inter-Module Synch Configure Error; Parameter - Mitsubishi Electric M800 Series Manual

Hide thumbs Also See for M800 Series:
Table of Contents

Advertisement

M800/M80/E80/C80 Series Alarm/Parameter Manual
14 Multi CPU Errors (A) [C80]
A01
CPU module configuration error
Details
The host CPU No. set in the system parameters ("I/O Assignment Setting") differs from the one determined
by the mounting position of the CPU module.
Remedy
Re-set the host CPU No. in the system parameters in accordance with the mounting position of the CPU
module.
A01
CPU module configuration error
Details
An unsupported CPU module is mounted.
Remedy
Remove the unsupported CPU module. If all the CPU modules are supported, the possible cause is a
hardware failure of the CPU module or base unit. Please consult your local Mitsubishi representative.
A01

Base unit A configuration error

Details
Eight or more extension base units are connected.
Remedy
Reduce the number of extension base units to seven or less.
A01
Base unit A configuration error
Details
Any of the following base units is connected: QA1S3 B, QA1S5 B/QA1S6 B, QA6 B, QA6ADP+A5 B/A6
B, or QA1S6ADP+A1S5 B/A1S6 B.
Remedy
Remove the inapplicable base unit: QA1S3 B,QA1S5 B/QA1S6 B, QA6 B, QA6ADP+A5 B/A6 B B, and
QA1S6ADP+A1S5 B/A1S6 B.
A01
Base unit A configuration error
Details
Extension base unit levels are overlapping.
Remedy
Check and correct the level setting of the extension base units.
A01
Base unit A configuration error
Details
An unsupported base unit is connected.
A GOT is bus-connected to the Q series extension base unit.
Remedy
Disconnect the unsupported base unit. If all the base units are supported, the possible cause is a hardware
failure of the CPU module or base unit. Please consult your local Mitsubishi representative.
Disconnect the GOT bus-connected to the Q series extension base unit.
A01

Inter-module synch configure error

Details
An inter-module synchronization signal error has been detected.
Remedy
The possible cause is a hardware failure of the CPU module, base unit, or module (I/O module or intelligent
function module) connected. Please consult your local Mitsubishi representative.
IB-1501279-H
182
2044
2050
2060
2061
2063
2070
2080

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C80 seriesM80 seriesE80 series

Table of Contents