Mitsubishi Electric M800 Series Manual page 725

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters
#80006+20(n-1)
Specify the name of PLC device to which Implicit Message output data is transferred. (n=1 to 64)
Example) Y
---Setting range---
Y, M, L, SB, B, SW, D, R, W
#80007+20(n-1)
Specify the top No. of PLC device to which Implicit Message output data is transferred. (n=1 to 64)
If you specify bit device, set it in increments of 16 points.
Example) 100
---Setting range---
Y: 0 to 5F0
M: 0 to 61424
L: 0 to 32752
SB: 0 to 7FF0
B: 0 to EFF0
SW: 0 to 7FFF
D: 0 to 32767
W: 0 to 7FFF
R: 8300 to 9799, 9800 to 9899, 18300 to 19799, 19800 to 19899, 28300 to 29799, 29800 to 29899
#80008+20(n-1)
Specify the size (bytes) of Implicit Message output data that is transferred to PLC device. (n=1 to 64)
Example) 1
---Setting range---
0 to 505 (bytes)
* Up to 5000 bytes in total for all nodes
#80009+20(n-1)
Specify the name of PLC device to which connection status of the device assigned to node is transferred.
(n=1 to 64)
Example) M
---Setting range---
M, L, SB, B, SW, D, R, W
#80010+20(n-1)
Specify the top No. of PLC device to which connection status of the device assigned to node is transferred.
(n=1 to 64)
6 bytes of data starting from the specified device No. are occupied.
Example) 1024
---Setting range---
M: 0 to 61424
L: 0 to 32752
SB: 0 to 7FF0
B: 0 to EFF0
SW: 0 to 7FFF
D: 0 to 32767
W: 0 to 7FFF
R: 8300 to 9799, 9800 to 9899, 18300 to 19799, 19800 to 19899, 28300 to 29799, 29800 to 29899
IB-1501279-H
N001 out dev name
N001 out dev No.
N001 out dev size
N001 sts dev name
N001 sts dev No.
708
Scanner function Implicit Message: PLC device name
(OUT (O->T))
Scanner function Implicit Message: PLC device top No.
(OUT (O->T))
Scanner function Implicit Message: PLC device size
(OUT (O->T))
Scanner function Implicit Message: connection status
assign PLC device name
Scanner function Implicit Message: connection status
assign PLC device No.