Ethernet/Ip Parameters [M8]; Ethernet/Ip Parameters Scanner 1 - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters

16.32 EtherNet/IP Parameters [M8]

16.32.1 EtherNet/IP Parameters Scanner 1

#80000+20(n-1)
Specify the No. of the device that is assigned to node. (n=1 to 64)
---Setting range---
1 to 128
#80001+20(n-1)
Specify the position No. that is assigned to node. (n=1 to 64)
---Setting range---
0 to 63
#80002+20(n-1)
Specify the PLC project No. that is assigned to node. (n=1 to 64)
This number is set as the project No. of PLC device to which the node input/output/connection status is as-
signed.
---Setting range---
1 to 6
#80003+20(n-1)
Specify the name of PLC device to which Implicit Message input data is transferred. (n=1 to 64)
Example) X
---Setting range---
X, M, L, SB, B, SW, D, R, W
#80004+20(n-1)
Specify the top No. of PLC device to which Implicit Message input data is transferred. (n=1 to 64)
If you specify bit device, set it in increments of 16 points.
Example) 100
---Setting range---
X: 0 to 5F0
M: 0 to 61424
L: 0 to 32752
SB: 0 to 7FF0
B: 0 to EFF0
SW: 0 to 7FFF
D: 0 to 32767
W: 0 to 7FFF
R: 8300 to 9799, 9800 to 9899, 18300 to 19799, 19800 to 19899, 28300 to 29799, 29800 to 29899
#80005+20(n-1)
Specify the size (bytes) of Implicit Message input data that is transferred to PLC device. (n=1 to 64)
Example) 1
---Setting range---
0 to 509 (bytes)
* Up to 5000 bytes in total for all nodes
N001 Device Number
N001 Position No.
N001 Project No.
N001 in dev name
N001 in dev No.
N001 in dev size
707
Scanner function Implicit Message: device No.
Scanner function Implicit Message: position No.
Scanner function Implicit Message: PLC project No.
Scanner function Implicit Message: PLC device name
(IN (T->O))
Scanner function Implicit Message: PLC device top No.
(IN (T->O))
Scanner function Implicit Message: PLC device size (IN
(T->O))
IB-1501279-H