Sram Open Parameters - Mitsubishi Electric M800 Series Manual

M800/M80/E80/C80 Series Alarm/Parameter Manual
16 Machine Parameters

16.23 SRAM Open Parameters

(Note) This parameter description is common for M800/M80 Series.
It is written on the assumption that all option functions are added.
Confirm with the specifications issued by the machine tool builder before starting use.
#41001- SRAM Open Parameters
41100
<Data typ>
Set the data type (CHAR, SHORT, LONG, DOUBLE) of the assignment area.
1: CHAR
2: SHORT
3: LONG
4: DOUBLE
<Data no>
Set the number of data in the assignment area. The number to be designated varies depending on the unit
and free area designated by the data format.
0 to 9999999
(Depends on the data format and free area)
<Disp typ>
Designate the status of data display format, display restrictions and input protection.
bit0: Cancellation of protection for input
Select whether to check the input protection on data protection key 2 on the group details screen.
(Note) The name of data protection key differs between machine tool builders. Refer to manuals issued by
each machine tool builder for details.
0: Check
1: Not check
bit1: Cancellation of restriction on display
Select whether to display the group details screen even when a machine tool builder password is not entered.
0: Not display
1: Display
bit4: BCD format
Display the data of the group details screen in BCD format.
0: Invalid
1: Valid
bit5: BIT format
Display the data of the group details screen in BIT format.
0: Invalid
1: Valid
bit6: HEX format (Hexadecimal format)
Display the data of the group details screen in HEX format.
0: Invalid
1: Valid
bit7: Sign (Decimal format only)
Select whether to display the data of the group details screen in a decimal format with/without a sign.
0: With sign
1: Without sign
659 IB-1501279-H